PURGE VALVE INSTALLATION

PROCEDURE

  1. INSTALL PURGE VALVE (PURGE VSV)

    1. Install the purge valve (purge VSV) to the No. 1 EGR pipe sub-assembly with the bolt.

      8.8 N*m

      90 kgf*cm

      78 in.*lbf

    2. Connect the No. 1 fuel vapor feed hose and No. 2 fuel vapor feed hose to the purge valve (purge VSV) and slide the 2 clips to secure them.

      A426659C01

      *1

      No. 1 Fuel Vapor Feed Hose

      *2

      No. 2 Fuel Vapor Feed Hose

      *a

      2 to 7 mm (0.0787 to 0.276 in.)

      *b

      2 to 5 mm (0.0787 to 0.197 in.)

      *c

      180°

      *d

      120°

      *e

      Rear

      *f

      Up

      *g

      Paint Mark

      -

      -
      Tip:

      Engage the clip within the area shown in the illustration.

    3. Connect the purge valve (purge VSV) connector.