PERSONAL LIGHT ASSEMBLY REMOVAL


  1. REMOVE MAP LIGHT ASSEMBLY


    1. A01DYH5

      Remove the 2 screws.

    2. Detach the claw and 2 guides and remove the map light assembly.

    3. Disconnect the connector.

  2. REMOVE NO. 1 MAP LIGHT LENS


    1. A01E014E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, detach the claw and remove the No. 1 map light lens.

      Tech Tips

      Protective tape the screwdriver tip before use.

  3. REMOVE NO. 2 MAP LIGHT LENS

    Tech Tips

    Use the same procedure described for the No. 1 map light lens.

  4. REMOVE MAP LIGHT BULB


    1. Remove the 2 map light bulbs from the map light assembly.