OIL PRESSURE SWITCH INSPECTION

PROCEDURE

1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY

   1. Disconnect the engine oil pressure switch connector.

   2. Start the engine.

   3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection	Condition	Specified Condition
      1 - Body ground	Engine stopped	Below 1 Ω
      	Engine idling	10 kΩ or higher

      If the result is not as specified, replace the engine oil pressure switch assembly.

   4. Connect the engine oil pressure switch connector.