ROCKER OUTER PANEL CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A004L93

  1. REMOVAL

    Symbol meaning
    A004L9C Remove Weld Points
    A004L8V Cut and Join Location
    A004L11 Cut Location for Supply Parts
    A004L50E02

  2. INSTALLATION

    Symbol meaning
    A004L4Z Plug Weld
    A004L9D Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A004L2AE01
    *1 ROCKER PANEL OUTER REAR