PRE-CRASH SAFETY SYSTEM DETAILS INDICATOR LIGHT/WARNING LIGHT/MULTI DISPLAY

  1. FUNCTION

    1. The combination meter assembly uses the PCS warning light, PCS OFF warning light and buzzer to provide the driver with pre-crash safety system warnings and indications.

    2. If the pre-crash safety city sensor determines that the possibility of a collision is high, it sends a signal to the combination meter assembly. Upon receiving this signal, the combination meter assembly indicates a warning using the PCS warning light and buzzer. Details are indicated below.

      Table 1. When there is a high possibility of a collision

      PCS Warning Light

      Buzzer

      Flashes Quickly

      Sounds Continuously

    3. When the system is not available, the following warning occurs to warn the driver.

      Table 2. When a system malfunction is detected

      Detail

      PCS OFF Warning Light

      Buzzer

      When the pre-crash safety city sensor detects a system malfunction.

      Flashes

      Sounds

      This message appears when the pre-crash safety city sensor determines either of the following conditions is present:

      • Dirty pre-crash safety city sensor or windshield

      • Poor weather conditions

      • Temperature of pre-crash safety city sensor is Abnormal

      After these conditions have been resolved, the system will operate normally.

      Flashes

      -

      Table 3. When the pre-crash system cancel switch assembly is pressed

      Detail

      PCS OFF Warning Light

      Buzzer

      Pre-crash safety system operation is disabled.

      Illuminates

      -

      Table 4. When the VSC OFF switch is pressed

      Detail

      PCS OFF Warning light

      Buzzer

      Pre-crash brake and pre-crash brake assist operation is disabled (the warning for when there is a high possibility of a collision is still enabled).

      Illuminates

      -