MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL TURBO PRESSURE SENSOR ASSEMBLY

   1. Using a T27 "TORX" socket wrench, install the turbo pressure sensor assembly to the intake manifold with the bolt.

      5.0 N*m

      51 kgf*cm

      44 in.*lbf

      Note:

      If the turbo pressure sensor assembly has been struck or dropped, replace it.

   2. Connect the turbo pressure sensor assembly connector.

2. INSTALL ENGINE OIL LEVEL DIPSTICK

   1. Install the engine oil level dipstick.

3. INSTALL NO. 1 ENGINE COVER

   Click hereClick hereClick here