STOP AND START SYSTEM


  1. OPERATION


    1. The combination meter assembly receives the idling on/off signals from the engine stop and start ECU.

    2. Pressing the DISP switch several times changes the multi-information display and displays the idle stop time.


      1. Eco Odometer Display: Total idle stop time since the last time the reset was made. The reset can be performed by pressing and holding the DISP switch (total idle stop time is not erased by turning the ignition switch off).

    3. System operation status and warnings are informed to the driver by the stop and start indicator light, stop and start cancel indicator light and buzzer.

      A01JL58C01
      *1 Stop and Start Cancel Indicator Light *2 Stop and Start Indicator Light
      *3 Multi-information Display *4 DISP Switch

  2. OPERATION


    1. Stop and Start Indicator Light Operation

      Item Condition Stop and Start Indicator Light Buzzer
      System Operating (Engine is stopped) The vehicle is operating normally. Illuminates Does not sound
      The driver's door is opened with the shift lever in D or M. Blinks Sounds

    2. Stop and Start Cancel Indicator Light Operation

      Condition Stop and Start Indicator Light
      The vehicle is stopped and system operation conditions are met. Off
      When the ecorun cancel switch assembly is on. Illuminates
      Any Diagnostic Trouble Codes (DTCs) are detected. Blinks*
      The number of times the starter assembly has been operated exceeds the threshold.

      Tech Tips

      *: The blinking interval is 0.5 seconds.