EXHAUST GAS TEMPERATURE SENSOR(for Sensor 2) REMOVAL

PROCEDURE

  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Sensor 2)

    Note:

    If the exhaust gas temperature sensor is dropped, replace it with a new one.

    1. A341657

      Disconnect the exhaust gas temperature sensor connector.

    2. Detach the wire harness clamp.

    3. Disconnect the wire harness from the hook on the cylinder head cover side.

    4. A341658

      Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.