HEATER EXHAUST PIPE(w/ Combustion Type Power Heater) REMOVAL

PROCEDURE

  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE FRONT WIPER ARM HEAD CAP

    Click here

  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

    Click here

  4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

    Click here

  5. REMOVE HOOD TO COWL TOP SEAL

    Click here

  6. REMOVE COWL TOP VENTILATOR LOUVER LH

    Click here

  7. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  8. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  9. REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for DPF)

    Click here

  10. REMOVE OUTER COWL TOP PANEL

    Click here

  11. REMOVE AIR DUCT

    Click here

  12. REMOVE NO. 1 EXHAUST PIPE SUB-ASSEMBLY

    1. E143095

      Remove the 3 nuts and No. 1 exhaust pipe sub-assembly.

  13. REMOVE HEATER WITH EXHAUST PIPE ASSEMBLY

    Click here

  14. REMOVE NO. 2 EXHAUST PIPE SUB-ASSEMBLY

    1. E143099

      Remove the 2 bolts and No. 2 exhaust pipe sub-assembly.

  15. REMOVE HEAT EXCHANGER UNIT GASKET

    Click here