REAR VIEW MONITOR SYSTEM(w/o Side Monitor System)

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

Use these procedures to troubleshoot the rear view monitor system.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result

    Proceed to

    NEXT
    NEXT

  2. INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage with the engine switch off.

      Standard voltage

      11 to 14 V

      If the voltage is below 11 V, replace or recharge the battery before proceeding.

      Result

      Proceed to

      NEXT
    NEXT

  3. CUSTOMER PROBLEM ANALYSIS

    Result

    Proceed to

    NEXT
    NEXT

  4. PROBLEM SYMPTOM CONFIRMATION

    Result

    Proceed to

    NEXT
    NEXT

  5. PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table.

      Click here

      Result

      Result

      Proceed to

      Fault is not listed in Problem Symptoms Table

      A

      Fault is listed in Problem Symptoms Table

      B
    B

    ADJUST, REPAIR OR REPLACEClick here

    A

  6. OVERALL ANALYSIS AND TROUBLESHOOTING

    1. Terminals of ECU.

      Click here

      Result

      Proceed to

      NEXT
    NEXT

  7. ADJUST, REPAIR OR REPLACE

    Result

    Proceed to

    NEXT
    NEXT

  8. CONFIRMATION TEST

    Result

    Proceed to

    NEXT
    NEXT

    END