STEERING GEAR DISASSEMBLY

PROCEDURE

  1. FIX STEERING GEAR ASSEMBLY

    1. C151611C01

      *a

      Protective tape

      Using SST, fix the power steering gear assembly.

      Tip:

      Apply protective tape to SST before use.

      09612-00012

  2. REMOVE TIE ROD END SUB-ASSEMBLY LH

    1. C275662C01

      *a

      Matchmark

      Put matchmarks on the tie rod end sub-assembly LH and rack end.

    2. Remove the tie rod end sub-assembly LH and lock nut.

  3. REMOVE TIE ROD END SUB-ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

  4. REMOVE STEERING RACK BOOT CLIP

    1. Using pliers, remove the 2 steering rack boot clips.

  5. REMOVE NO. 2 STEERING RACK BOOT CLAMP

    1. C110164

      Using a screwdriver, remove the No. 2 steering rack boot clamp.

      Note:

      Be careful not to damage the steering rack boot.

  6. REMOVE NO. 1 STEERING RACK BOOT CLAMP

    Tip:

    Use the same procedure described for the No. 2 steering rack boot clamp.

  7. REMOVE NO. 2 STEERING RACK BOOT

    1. Remove the No. 2 steering rack boot.

  8. REMOVE NO. 1 STEERING RACK BOOT

    1. Remove the No. 1 steering rack boot.