DIFFERENTIAL OIL SEAL REPLACEMENT

PROCEDURE

  1. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click hereClick hereClick here

  2. REMOVE TRANSAXLE CASE OIL SEAL LH

    1. C201712N02

      Using SST, tap out the transaxle case oil seal LH.

      09308-00010

  3. REMOVE TRANSAXLE CASE OIL SEAL RH

    1. C201713N02

      Using SST, tap out the transaxle case oil seal RH.

      09308-00010

  4. INSTALL TRANSAXLE CASE OIL SEAL RH

    1. C201715N02

      Using SST and a hammer, tap in a new transaxle case oil seal RH.

      09316-60011

      09316-00011

      Oil seal driven in depth

      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note:

      Check that the transaxle case oil seal RH is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal RH with MP grease.

  5. INSTALL TRANSAXLE CASE OIL SEAL LH

    1. C201714N02

      Using SST and a hammer, tap in a new transaxle case oil seal LH.

      09316-10010

      09950-70010

      09951-07150

      Oil seal driven in depth

      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note:

      Check that the transaxle case oil seal LH is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal LH with MP grease.

  6. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click hereClick hereClick hereClick here