UNDER BODY REFERENCE VALUES THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Point A, a and B, b on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Side Rail Reinforcement Rear Installation Bolt | M12 (0.47) |
| B, b | Side Rail Reinforcement Rear Installation Bolt | M12 (0.47) |
| C, c | Front Suspension Member Installation Bolt | M14 (0.55) |
| D, d | Front Suspension Member Installation Bolt | M14 (0.55) |
| E, e | Front Side Member Standard Hole | φ18 (0.71) |
| *1 | Distance between points other than those above |
| *2 | mm |
| *3 | (in.) |