FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Main Body ECU (Multiplex Network Body ECU) |
|
| Headlight ECU Sub-assembly LH/RH | Receives cornering light operation signals from the main body ECU (multiplex network body ECU) and operates the cornering lights accordingly. |
| Hybrid Vehicle Coutrol ECU Assembly | Transmits the shift position signals to the main body ECU (multiplex network body ECU). |
| Skid Control ECU Assembly | Sends the wheel speed signal to the main body ECU (multiplex network body ECU). |
| Automatic Light Control Sensor | Detects the ambient light level. |
| Headlight Dimmer Switch Assembly | Outputs a light control signal to the main body ECU (multiplex network body ECU). |
| Spiral Cable with Sensor Sub-assembly
|
Detects the angle of the steering wheel and sends the resulting signals to the main body ECU (multiplex network body ECU). |
SYSTEM CONTROL
Operating Condition
When the vehicle is turning a corner, the cornering light on the inside of the turn is illuminated to ensure visibility of the area ahead.
When the vehicle is reversing, both cornering lights are illuminated to ensure visibility on both sides of the vehicle.*
*: Except destination package for South Korea
When all of the following conditions are met, the cornering light on the inside of the turn is illuminated.
The power switch is on (IG).
The low beams are operating
The vehicle speed is approximately 35 km/h or less.
The turn signal switch is on or the steering wheel is turned 80° or more.
When all of the following conditions are met, the cornering lights on both sides of the vehicle are illuminated.*
The power switch is on (IG).
The low beams are operating.
The shift lever is in R.
*: Except destination package for South Korea