SFI SYSTEM
Figure 1. Destination Package for South Korea
| *1 | MASS AIR FLOW METER SUB-ASSEMBLY
|
*2 | PURGE VSV |
| *3 | ECM ASSEMBLY | *4 | COOLING FAN ECU |
| *5 | AIR FUEL RATIO SENSOR (Bank 2, Sensor 1) | *6 | NO. 2 COOLING FAN ECU |
| *7 | HEATED OXYGEN SENSOR (Bank 2, Sensor 2) | *8 | AIR FUEL RATIO SENSOR (Bank 1, Sensor 1) |
| *9 | HEATED OXYGEN SENSOR (Bank 1, Sensor 2) | *10 | CANISTER PUMP MODULE
|
| *11 | FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
|
*12 | FUEL PUMP CONTROL ECU ASSEMBLY |
Figure 2. Except Destination Package for South Korea
| *1 | MASS AIR FLOW METER SUB-ASSEMBLY
|
*2 | PURGE VSV |
| *3 | ECM ASSEMBLY | *4 | COOLING FAN ECU |
| *5 | AIR FUEL RATIO SENSOR (Bank 2, Sensor 1) | *6 | NO. 2 COOLING FAN ECU |
| *7 | HEATED OXYGEN SENSOR (Bank 2, Sensor 2) | *8 | AIR FUEL RATIO SENSOR (Bank 1, Sensor 1) |
| *9 | HEATED OXYGEN SENSOR (Bank 1, Sensor 2) | *10 | FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
|
| *11 | FUEL PUMP CONTROL ECU ASSEMBLY | - | - |
| *1 | KNOCK CONTROL SENSOR | *2 | CAM POSITION SENSOR (NO. 2 CRANK POSITION SENSOR) (Exhaust) |
| *3 | EGR VALVE ASSEMBLY | *4 | FUEL PRESSURE SENSOR (for Low Pressure) |
| *5 | CAM POSITION SENSOR (NO. 2 CRANK POSITION SENSOR) (Intake) | *6 | CAM TIMING OIL CONTROL SOLENOID ASSEMBLY (Exhaust) |
| *7 | CAM TIMING OIL CONTROL SOLENOID ASSEMBLY (Intake) | *8 | IGNITION COIL ASSEMBLY |
| *9 | THROTTLE BODY WITH MOTOR ASSEMBLY
|
- | - |
 |
Engine Front | - | - |
| *1 | EDU (INJECTOR DRIVER) | *2 | FUEL INJECTOR ASSEMBLY (for Direct Injection) |
| *3 | FUEL PRESSURE SENSOR (for High Pressure) | *4 | ENGINE COOLANT TEMPERATURE SENSOR |
| *5 | CRANK POSITION SENSOR | *6 | FUEL PUMP ASSEMBLY (for High Pressure) |
| *7 | VACUUM SENSOR ASSEMBLY | *8 | FUEL INJECTOR ASSEMBLY (for Port Injection) |
Figure 3. LHD Models
| *1 | COMBINATION METER ASSEMBLY
|
*2 | HYBRID VEHICLE CONTROL ECU ASSEMBLY |
| *3 | DLC3 | *4 | AIR CONDITIONING AMPLIFIER ASSEMBLY |
| *5 | CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) | - | - |
| *a | Refer to Service Bulletin for the installation position of the part. | - | - |
Figure 4. RHD Models
| *1 | AIR CONDITIONING AMPLIFIER ASSEMBLY | *2 | HYBRID VEHICLE CONTROL ECU ASSEMBLY |
| *3 | DLC3 | *4 | COMBINATION METER ASSEMBLY
|
| *5 | CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) | - | - |
| *a | Refer to Service Bulletin for the installation position of the part. | - | - |