SEAT MEMORY SWITCH INSPECTION

PROCEDURE

  1. INSPECT SEAT MEMORY SWITCH

    1. Check the resistance.

      1. B341330C01

        *a

        Component without harness connected

        (Seat Memory Switch)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Switch Condition

        Specified Condition

        3 (M1) - 1 (E)

        Memory 1 switch on

        Below 1 Ω

        4 (M2) - 1 (E)

        Memory 2 switch on

        Below 1 Ω

        2 (MRY) - 1 (E)

        SET switch on

        Below 1 Ω

        If the result is not as specified, replace the seat memory switch.