FRONT DOOR THREE-DIMENSIONAL DISTANCE

Tip:

Use point S when performing centering measurements for the body dimensions.
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Table 1. Measuring Point Name
Symbol	Name	Hole Diameter mm (in.)
A, a	Roof Panel Corner	-
B, b	Hood Hinge Installation Nut	M8 (0.31)
C, c	Front Door Hinge Installation Nut	M8 (0.31)
D, d	Front Door Hinge Installation Nut	M8 (0.31)
E, e	Front Body Pillar Assembly Mark	-
F, f	Front Body Pillar Assembly Mark	-
G, g	Front Body Pillar Assembly Mark	-
H, h	Rocker Panel Assembly Mark	-
J, j	Rocker Panel Assembly Mark	-
K, k	Roof Side Rail Assembly Mark	-
L, l	Center Body Pillar Assembly Mark	-
M, m	Center Body Pillar Assembly Mark	-
N, n	Front Door Lock Striker Installation Nut	M8 (0.31)
O, o	Rear Door Hinge Installation Nut	M8 (0.31)
P, p	Rear Door Hinge Installation Nut	M8 (0.31)
Q, q	Rocker Panel Assembly Mark	-
R, r	Front Seat Inside Bracket Standard Hole	φ10 (0.39)
S	Front Floor Panel Front Reinforcement Standard Hole	φ10 (0.39)