CLUTCH UNIT(for EC6A) INSPECTION

PROCEDURE


  1. INSPECT CLUTCH DISC ASSEMBLY

    A001VJ4

    1. Using a vernier caliper, measure the rivet head depth.

      Minimum Rivet Depth
      0.3 mm (0.0118 in.)

      If necessary, replace the clutch disc assembly.

    2. Install the clutch disc assembly to the manual transaxle assembly.

      Tech Tips

      Insert the clutch disc assembly in the correct direction.

    3. A001V0R

      Using a dial indicator, measure the clutch disc assembly runout.

      Maximum Runout
      0.8 mm (0.0315 in.)

      If necessary, replace the clutch disc assembly.

  2. INSPECT CLUTCH COVER ASSEMBLY

    A001Y3DE01

    1. Using a vernier caliper, measure the depth and width of the diaphragm spring wear.

      Maximum
      A (Depth): 0.5 mm (0.0197 in.)
      B (Width): 6.0 mm (0.236 in.)

      If necessary, replace the clutch cover assembly.

  3. INSPECT FLYWHEEL SUB-ASSEMBLY

    A001TX6

    1. Using a dial indicator, check the flywheel sub-assembly runout as shown in the illustration.

      Maximum Runout
      0.1 mm (0.00394 in.)

      If necessary, replace the flywheel sub-assembly.