LIGHTING SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE


  1. CUSTOMIZE LIGHTING SYSTEM (INT)


    1. Customizing using the GTS

      Tech Tips

      The following items can be customized.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Illuminated Entry.

      5. Select the setting by referring to the table below.


        Illuminated Entry
        Tester Display Description Default Setting ECU
        Lighting Time

        Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly is on:


        • Map Light Assembly

        • No. 1 Room Light Assembly

        • No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1

        • Instrument Cluster Finish Panel Garnish (Cup holder Illumination Light)*1

        		 15 s 10:30 s,00:15 s,01:7.5 s Main body ECU (Multiplex network body ECU)
        I/L when ACC OFF

        Turns off the following lights automatically when the door switch of the map light assembly is on and the ignition switch is turned from ACC or ON to off:


        • Map Light Assembly

        • No. 1 Room Light Assembly

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        I/L ON W/Door Key Unlock

        Turns on the following lights automatically when the door switch of the map light assembly is on and the doors are unlocked by an unlock operation (key-linked, wireless or entry unlock function):


        • Map Light Assembly

        • No. 1 Room Light Assembly

        • No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1

        • Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*1

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Room Light when Aprchd

        Turns on the following lights when the door switch of the map light assembly is on and the electrical key transmitter sub-assembly is brought near the vehicle (*2):


        • Map Light Assembly

        • No. 1 Room Light Assembly

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Light Control

        Dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P:


        • No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1

        • Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*1

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Interior Light Control

        Turns on the following lights:


        • Map Light Assembly

        • No. 1 Room Light Assembly

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Interior Illumination Light

        Turns on the following lights:


        • No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1

        • Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*1

        		 ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)

        • *1: w/ Door Ambient Illumination Light

        • *2: w/ Entry and Start System

    2. Customizing using the multi-display


      1. Turn the ignition switch to ON.

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customisation / Lights Settings.

      3. Select the setting by referring to the table below:

        Light Settings
        Display Default Content Setting Relevant ECU
        Interior lights off timer 15 sec.

        Changes the lighting time of the following lights that are operated by the timer function when the door switch of the map light assembly is on:


        • Map Light Assembly

        • No. 1 Room Light Assembly

        • No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1

        • Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*1

        		 Off, 15 sec., 7.5 sec. or 30 sec. Main body ECU (Multiplex network body ECU)

        • *1: w/ Door Ambient Illumination Light