REAR NO. 1 SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY

    E121025E02

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Seat belt fastened

      (Buckle switch is on)

      1 MΩ or higher

      1 - 2

      Seat belt unfastened

      (Buckle switch is off)

      Below 1 Ω
      Table 1. Text in Illustration

      *1

      Component without harness connected

      (Rear Seat 3 Point Type Inner Belt)

      If the operation is not as specified, replace the inner belt assembly.