CANVAS TOP SYSTEM OPERATION CHECK

  1. CHECK AUTO OPERATION FUNCTION

    Note:

    Make sure that initialization has been completed before performing this inspection.

    Click here

    Tip:

    When a switch is pressed for 0.3 seconds or less, the canvas top moves but the auto operation function does not operate.

    1. Turn the ignition switch to ON.

    2. When the canvas top is fully closed, press the open switch for 0.3 seconds or more. Check that the canvas top automatically opens until it is fully opened.

    3. When the canvas top is fully opened, press the close switch for 0.3 seconds or more. Check that the canvas top automatically closes until it reaches the partially closed position.

    4. When the auto operation function is operating, check that pressing any of the switches on the slide roof motor switch stops the canvas top operation.