WINDOW DEFOGGER WIRE REPAIR

PROCEDURE

  1. REPAIR BACK DOOR GLASS (REAR WINDOW DEFOGGER WIRE)

    B106758C14

    *a

    Masking Tape

    *b

    Broken Wire

    *c

    Repair Point

    1. Clean the broken wire tips with a grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. B106759

      Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).

    4. Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note:

      Do not use the rear window defogger for at least 24 hours after performing the repair.