RADIATOR INSTALLATION

PROCEDURE

1. INSTALL RADIATOR ASSEMBLY

   1. Engage the 2 guides.

   2. Install the fan shroud assembly to the radiator assembly with the 2 bolts.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

      Note:

      Do not damage the radiator assembly when installing the fan shroud assembly.

2. INSTALL INTERCOOLER ASSEMBLY

   Click here

3. INSTALL RADIATOR ASSEMBLY AND FAN SHROUD ASSEMBLY

   1. Install the 2 lower radiator supports.

   2. Install the intercooler assembly, radiator assembly and fan shroud assembly to the vehicle body.

   3. Connect the 2 connectors.

   4. Engage the clamp.

4. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

   Click here

5. INSTALL NO. 1 RADIATOR AIR GUIDE RH

   1. Engage the 2 claws and install a new No. 1 radiator air guide RH.

6. INSTALL NO. 1 RADIATOR AIR GUIDE LH

   1. Engage the 2 claws and install a new No. 1 radiator air guide LH.

7. CONNECT NO. 2 RADIATOR HOSE

   1. Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.

8. CONNECT NO. 3 AIR HOSE

   1. Connect the No. 3 air hose to the intercooler assembly and tighten the hose clamp.

      6.5 N*m

      66 kgf*cm

      58 in.*lbf

9. CONNECT NO. 2 AIR HOSE

   1. Connect the No. 2 air hose to the intercooler assembly and tighten the hose clamp.

      6.5 N*m

      66 kgf*cm

      58 in.*lbf

10. CONNECT NO. 1 RADIATOR HOSE

    1. Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.

11. CONNECT NO. 3 WATER BY-PASS HOSE

    1. Connect the No. 3 water by-pass hose to the radiator assembly and slide the clip to secure it.

    2. Engage the clamp to connect the No. 3 water by-pass hose to the fan shroud assembly.

12. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    1. Install the upper radiator support sub-assembly with the 4 bolts.

       12.5 N*m

       127 kgf*cm

       9 ft.*lbf

    2. for RHD:

       1. Engage the clamp to connect the wire harness to the upper radiator support sub-assembly.

       2. Engage the 2 clamps to connect the hood lock control cable assembly to the upper radiator support sub-assembly.

    3. for LHD:

       1. Engage the clamp to connect the wire harness to the upper radiator support sub-assembly.

       2. Engage the 2 clamps to connect the hood lock control cable assembly to the upper radiator support sub-assembly.

    4. Engage the 2 clamps to connect the No. 2 water by-pass hose to the upper radiator support sub-assembly.

13. INSTALL THERMISTOR ASSEMBLY

    Click here

14. INSTALL BATTERY CARRIER

    Click hereClick here

15. INSTALL BATTERY

    Click hereClick here

16. INSTALL CONDENSER WITH RECEIVER ASSEMBLY (w/ Air Conditioning System)

    Click here

17. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY RH

    1. Install the upper radiator support sub-assembly RH with the 2 bolts.

       7.0 N*m

       71 kgf*cm

       62 in.*lbf

18. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY LH

    1. Install the upper radiator support sub-assembly LH with the 2 bolts.

       7.0 N*m

       71 kgf*cm

       62 in.*lbf

19. INSTALL UPPER RADIATOR SUPPORT

    1. Install the radiator support cushion to each upper radiator support.

    2. Install the 2 upper radiator supports with the 2 bolts.

       19 N*m

       194 kgf*cm

       14 ft.*lbf

20. CONNECT AIR CONDITIONER TUBE ASSEMBLY (w/ Air Conditioning System)

    Click here

21. CONNECT DISCHARGE HOSE SUB-ASSEMBLY (w/ Air Conditioning System)

    Click here

22. INSTALL RADIATOR SUPPORT TO CROSS MEMBER BRACE SUB-ASSEMBLY

    1. Install the radiator support to cross member brace sub-assembly with the 2 bolts.

       8.0 N*m

       82 kgf*cm

       71 in.*lbf

    2. Connect the connector.

23. INSTALL NO. 3 RADIATOR AIR GUIDE

    1. Engage the claw.

    2. Install a new No. 3 radiator air guide with the 2 screws and 2 clips.

24. INSTALL HOOD LOCK ASSEMBLY

    Click here

25. INSTALL HEADLIGHT ASSEMBLY LH

    Click here

26. INSTALL HEADLIGHT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

27. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

28. ADD ENGINE COOLANT

    Click here

29. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT (w/ Air Conditioning System)

    for HFC-134a (R134a):Click here

    for HFO-1234yf (R1234yf):Click here

30. INSPECT FOR COOLANT LEAK

    Click here

31. WARM UP ENGINE (w/ Air Conditioning System)

    for HFC-134a (R134a):Click here

    for HFO-1234yf (R1234yf):Click here

32. INSPECT FOR REFRIGERANT LEAK (w/ Air Conditioning System)

    for HFC-134a (R134a):Click here

    for HFO-1234yf (R1234yf):Click here

33. INSTALL NO. 1 ENGINE UNDER COVER

    1. Install the No. 1 engine under cover with the 11 clips and 6 bolts.