NAVIGATION SYSTEM(for DVD) Cellular Phone cannot Send/Receive

PROCEDURE

1. CHECK "BLUETOOTH" SETTINGS

   1. Check if the "Bluetooth" settings are correct.

      OK

      "Bluetooth" settings are correct.

      Result

      Result
      OK
      NG

   NG

   SET SETTINGS CORRECTLY

   OK

2. CHECK CELLULAR PHONE

   1. Check if the cellular phone is "Bluetooth" compatible.

      Tip:

      Some versions of "Bluetooth" compatible cellular phones may not function.

      OK

      Cellular phone is "Bluetooth" compatible.

      Result

      Result
      OK
      NG

   NG

   END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED)

   OK

3. CHECK SETTINGS

   Tip:

   The cellular phone is unable to call under any of the following conditions:

   • The cellular phone is locked.

   • The directory is being transferred.

   • There is a network error.

   • Transmission is regulated.

   • The power is off.

   • The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).

   1. Check the cellular phone settings.

      OK

      Cellular phone settings are set correctly.

      Result

      Result
      OK
      NG

   NG

   SET SETTINGS CORRECTLY

   OK

4. CHECK CELLULAR PHONE

   1. Check the cellular phone can make a call.

      OK

      Cellular phone can make a call.

      Result

      Result
      OK
      NG

   NG

   CELLULAR PHONE IS FAULTY

   OK

5. CHECK RECEPTION

   1. Set the cellular phone so that it can receive calls.

   2. Place the cellular phone close to the display and navigation module display.

   3. Check if the display and navigation module display to confirm that a "Bluetooth" connection exists between the display and navigation module display and the phone.

      OK

      Cellular phone has reception.

      Result

      Result
      OK
      NG

   OK

   PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

   Click here

   NG

   REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY

   Click here