COMBINATION METER INSTALLATION

PROCEDURE

1. INSTALL COMBINATION METER ASSEMBLY

   1. Connect the connector.

   2. Attach the 2 clips.

   3. Install the combination meter assembly with the 2 screws.

2. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   1. Attach the guide.

   2. Attach the 4 claws.

   3. Attach the 2 clips to install the instrument cluster finish panel sub-assembly.

   4. Attach the 4 claws.

4. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

   Click here

5. INSTALL NO. 2 SWITCH HOLE BASE

   Click here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

7. RESTORE AUTOAWAY/RETURN FUNCTION

   1. Restore the Autoaway/Return function setting to the previous condition by changing the customize parameter (Click here).