HEADUP DISPLAY REASSEMBLY

CAUTION / NOTICE / HINT

Note

When reassembling the combination meter subassembly, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

PROCEDURE


  1. INSTALL METER CIRCUIT PLATE SUB-ASSEMBLY


    1. B005YDZ

      Push the meter circuit plate sub-assembly in the direction indicated by the arrow to engage the 2 guides.

    2. B005ZVL

      Install the meter circuit plate sub-assembly with the 2 screws.

  2. INSTALL COMBINATION METER WIRE


    1. B005XPY

      Connect the connector to install the combination meter wire.

    2. Engage the clamp.

  3. INSTALL NO. 2 COMBINATION METER MIRROR


    1. B005Y37

      Install the No. 2 combination meter mirror as shown in the illustration.

  4. INSTALL NO. 1 COMBINATION METER MIRROR PLATE


    1. B005ZEE

      Engage the 2 claws to install the No. 1 combination meter mirror plate as shown in the illustration.

  5. INSTALL COMBINATION METER MIRROR


    1. B005YI0

      Install the combination meter mirror with the 2 screws.

    2. B005YZN

      Connect the connector.

  6. INSTALL NO. 1 COMBINATION METER MIRROR CASE


    1. B005ZPI

      Engage the 4 claws.

    2. B005YI2

      Install the No. 1 combination meter mirror case with the 2 screws.

  7. INSTALL METER CIRCUIT PLATE COVER


    1. B005YCZ

      Engage the guide and install the meter circuit plate cover as shown in the illustration.

    2. B005Y1R

      Install the 4 screws.

  8. INSTALL COMBINATION METER MIRROR GLASS


    1. B005XZ4

      Install the combination meter mirror glass with the 4 screws.