PRE-CRASH SAFETY SYSTEM


  1. CONSTRUCTION


    1. A pre-crash safety system cancel switch assembly is provided to disable the system. When pressed and held for approximately 3 seconds, the pre-crash safety system will be disabled. A message will be displayed for 6 seconds and the PCS warning light will be illuminated. When the switch is pressed again while the system is disabled, the system will be reenabled.

    2. The switch is also used to change the warning timing in 3 levels: far, middle, near. The warning timing changes in the order below each time the switch is pressed.

      Figure 1. Models with Analog Type Combination Meter Assembly with Dot Display Type Multi-information Display

      B0020E6E02

      Figure 2. Models with Optitron Type Combination Meter Assembly

      B0020NNE01