GLOW PLUG CONTROLLER INSTALLATION

PROCEDURE

1. INSTALL NO. 2 GLOW PLUG CONTROLLER BRACKET

   
   

   1. Install the No. 2 glow plug controller bracket to the glow plug controller with the 2 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

2. INSTALL NO. 1 GLOW PLUG CONTROLLER BRACKET

   
   

   1. Install the No. 1 glow plug controller bracket to the glow plug controller with the 2 screws.

      Torque:

      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

3. INSTALL GLOW PLUG CONTROLLER

   
   

   1. for LHD:

      
      

      1. Install the glow plug controller with the 2 bolts.

         Torque:

         8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. for RHD:

      
      

      1. Install the glow plug controller with the bolt.

         Torque:

         8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   3. Connect the 4 connectors and attach the clamp.

4. CONNECT CABLE TO BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here