THERMOSTAT INSTALLATION

PROCEDURE

  1. INSTALL THERMOSTAT

    1. A316621

      Align the jiggle valve with the top of the water inlet to install the jiggle valve.

  2. INSTALL WATER INLET

    1. Temporarily install the water inlet together with the thermostat with the 4 bolts by hand.

    2. Using several steps, uniformly tighten the 4 bolts.

      Tip:

      Refer to "SPECIFICATIONS - STANDARD BOLT" for the tightening torque.

  3. CONNECT NO. 2 RADIATOR HOSE

    Click here

  4. INSTALL COMPRESSOR WITH PULLEY ASSEMBLY (w/ Air Conditioning System)

    (Click here)

  5. ADD ENGINE COOLANT

    Click here

  6. INSPECT FOR COOLANT LEAK

    Click here

  7. INSTALL NO. 1 ENGINE UNDER COVER

    Click here