HEIGHT CONTROL SENSOR(for Front Side) REMOVAL

CAUTION / NOTICE / HINT

Note

Be sure to read the "PRECAUTION" thoroughly before servicing.

Click here

Tech Tips


  • Use the same procedure for the RH and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL LH

    Click here

  2. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. B006AU2

      Disconnect the connector.

    2. Remove the bolt and sensor clamp.

    3. B006DCG

      Disconnect the connector.

    4. Detach the clamp and disconnect the wire harness clamp.

    5. B006AGV

      Remove the bolt and disconnect the height control sensor link from the No. 2 front suspension lower arm LH.

    6. B006E74

      Remove the 2 bolts and front height control sensor sub-assembly LH.

      Note

      Do not drop the rear height control sensor sub-assembly LH. If it is dropped, replace it with a new one.