REAR NO. 1 SEAT INNER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY LH

    U122494E01

    1. Install the inner belt with the nut.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

      Note:

      Do not allow the anchor part of the seat inner belt to overlap the protruding parts of the seat frame.

      Table 1. Text in Illustration

      *1

      Protruding Part

      *2

      Tape

      *3

      Rubber Band

    2. Attach the clamps as shown in the illustration.

    3. Attach the rubber band.

    4. B223673

      Attach the clamps.

  2. INSTALL REAR SEAT TRACK COVER LH

    Click here

  3. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

    1. Install the rear No. 1 seat assembly LH (Click here).