OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

   1. Install a new gasket to the engine oil pressure switch assembly.

   2. Using a 22 mm deep socket wrench, install the engine oil pressure switch assembly.

      22 N*m

      224 kgf*cm

      16 ft.*lbf

   3. Connect the engine oil pressure switch assembly connector.

2. INSTALL FRONT BUMPER ASSEMBLY

   Click here

3. CONNECT BATTERY NEGATIVE TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick here

4. INSPECT FOR OIL LEAK

   Click here