VANE PUMP (for 5L-E) DISASSEMBLY


  1. REMOVE POWER STEERING SUCTION PORT UNION


    1. A01DYPJ

      Remove the bolt and power steering suction port union.

    2. Using a screwdriver, remove the O-ring from the power steering suction port union.

  2. REMOVE FLOW CONTROL VALVE


    1. A01DW18

      Remove the pressure port union.

    2. Remove the O-ring from the pressure port union.

    3. Remove the flow control valve and compression spring.

  3. REMOVE REAR VANE PUMP HOUSING


    1. A01DY7J

      Remove the 4 bolts and rear vane pump housing.

    2. Remove the gasket.

    3. Remove the 2 O-rings from the rear vane pump housing.

  4. REMOVE REAR VANE PUMP SIDE PLATE


    1. Remove the wave washer from the rear vane pump side plate.

    2. A01DW2Q

      Remove the rear vane pump side plate.

  5. REMOVE VANE PUMP CAM RING


    1. A01DXIS

      Remove the vane pump cam ring.

  6. REMOVE VANE PUMP ROTOR


    1. Remove the 10 vane pump plates.

    2. A01DXXX

      Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft.

    3. Remove the vane pump rotor.

  7. REMOVE VANE PUMP SHAFT

  8. REMOVE PUMP HOUSING OIL SEAL


    1. A01DXMLE01

      Using a screwdriver, pry out the vane pump housing oil seal.

      Note

      Be careful not to damage the front vane pump housing.