TIRE PRESSURE WARNING RECEIVER(for Quarter Panel) INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

   Note

   
   

   • Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.

   • If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.

   
   
   1. 

      *A	for Type A
      *B	for Type B

      Connect the connector to the tire pressure warning ECU and receiver.

   2. Engage the 2 guides and install the tire pressure warning ECU and receiver with the bolt.

      Torque:

      for Type A

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

      for Type B

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      There are 3 types of bolts and the tightening torque depends on the type of bolt used as shown in the illustration. Therefore, confirm the tightening torque before installing the bolt.

2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

   Click here

4. INSTALL RECLINING REMOTE CONTROL BEZEL RH (w/o Rear Power Seat System)

   Click here

5. INSTALL FOLD SEAT SWITCH ASSEMBLY (w/ Rear Power Seat System)

   Click here

6. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

7. INSTALL ROPE HOOK ASSEMBLY

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

9. INSTALL REAR FLOOR FINISH SIDE PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

10. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

11. INSTALL UPPER QUARTER TRIM PAD RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

12. INSTALL REAR SEAT ASSEMBLY RH

    Click here

13. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

14. INSTALL REAR FLOOR FINISH PLATE

    Click here

15. INSTALL DECK SIDE TRIM BOX RH (except Full Size Spare Tire)

    Click here

16. INSTALL DECK SIDE TRIM BOX RH (for Full Size Spare Tire)

    Click here

17. INSTALL DECK FLOOR BOX RH (w/o Spare Tire)

    Click here

18. INSTALL REAR NO. 4 FLOOR BOARD (except Full Size Spare Tire)

    Click here

19. INSTALL REAR NO. 4 FLOOR BOARD (for Full Size Spare Tire)

    Click here

20. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

21. INSTALL SPARE WHEEL COVER (for Compact Spare Tire)

    Click here

22. INSTALL REAR FLOOR CARPET (w/o Spare Tire)

    Click here

23. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

24. INSTALL DECK BOARD ASSEMBLY

    Click here

25. INSTALL TONNEAU COVER ASSEMBLY

    Click here

26. REGISTER TRANSMITTER ID

    Click here

27. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

28. PERFORM INITIALIZATION

    Click here