REAR TURN SIGNAL LIGHT BULB REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR COMBINATION LIGHT COVER

    Click here

  2. REMOVE REAR COMBINATION LIGHT ASSEMBLY

    Click here

  3. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A001SRVC01
      B008LJK Remove in this Direction

      Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to disconnect them as a unit.

    2. A001TTHC01
      B008LJK Remove in this Direction

      Remove the rear turn signal light bulb from the rear combination light socket and wire as shown in the illustration.