NETWORK GATEWAY ECU(for LHD) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)

   
   

   1. Engage the claws to install the central gateway ECU (network gateway ECU).

      

      Note

      Make sure that the central gateway ECU (network gateway ECU) is securely installed.

2. INSTALL ECU INTEGRATION BOX RH

   
   

   1. Install the ECU integration box RH with the bolt and 2 nuts.

   2. 

      *a	w/ Smart Key System
      *b	w/ Stop and Start System

      Connect the connector.

   3. w/ Smart Key System:

      
      

      1. Connect the 3 connectors.

   4. w/ Stop and Start System:

      
      

      1. Connect the 3 connectors.

      2. Engage the wire harness clamps.

   5. Engage the wire harness clamps.

3. INSTALL NO. 2 INSTRUMENT PANEL LOWER FINISH PANEL

   Click here