LUGGAGE DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Roof Panel Corner | - |
| B, b | Upper Back Reinforcement Corner | - |
| C, c | Luggage Compartment Opening Trough Corner | - |
| D, d | Quarter Panel End Housing Corner | - |
| E, e | Quarter Panel Standard Hole | φ13 (0.51) |
| F, f | Quarter Panel End Housing Standard Hole | φ10 (0.39) |
| G, g | Rear Bumper Reinforcement Installation Nut | M10 (0.39) |
| H, h | Body Lower Back Panel Reinforce Corner | - |
| J | Luggage Door Lock Striker Installation Nut | M8 (0.31) |
| K, k | Floor Panel Front Reinforcement Standard Hole | φ10 (0.39) |
| L, l | Center Body Pillar Assembly Mark | - |
| *a | Distance between points other than those above | *b | mm (in.) |