REAR SEAT OUTER BELT ASSEMBLY(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY

   Click here

2. REMOVE REAR DOOR SCUFF PLATE LH

   Click hereClick hereClick here

3. REMOVE REAR DOOR SCUFF PLATE RH

   Tip:

   Use the same procedure as for the LH side.

4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

5. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

   Tip:

   Use the same procedure as for the LH side.

6. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY (for LH Side)

   Click hereClick hereClick here

7. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)

   Tip:

   Use the same procedure as for the LH side.

8. REMOVE REAR SEAT SIDE GARNISH LH

   Click hereClick hereClick here

9. REMOVE REAR SEAT SIDE GARNISH RH

   Tip:

   Use the same procedure as for the LH side.

10. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click hereClick hereClick here

11. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

12. REMOVE PACKAGE TRAY TRIM BELT HOLE COVER

    Tip:

    Use the same procedure for all package tray trim belt hole covers.

    1. 

       Disengage the 2 claws.

    2. Disengage the 2 guides to remove the package tray trim belt hole cover.

13. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    1. 

       Disconnect the connector.

    2. Disengage the 3 clips and 5 guides, and remove the package tray trim panel assembly.

14. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    1. 

       Remove the bolt and disconnect the floor anchor of the rear seat 3 point type outer belt assembly.

    2. 

       Remove the 2 bolts.

    3. Disengage the guide to remove the rear seat 3 point type outer belt assembly.