REAR DOOR LOCK REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  9. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    Click here

  10. REMOVE REAR DOOR ARMREST COVER

    Click here

  11. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  12. REMOVE REAR DOOR TRIM BRACKET

    Click here

  13. REMOVE REAR DOOR SERVICE HOLE COVER

    Click here

  14. REMOVE REAR DOOR GLASS RUN

    Click here

  15. REMOVE REAR DOOR WINDOW GUIDE SUB-ASSEMBLY

    Click here

  16. DISCONNECT REAR DOOR WEATHERSTRIP


    1. A005AD0

      Separate the rear door weatherstrip to the extent that the 2 installation screws of the rear door rear guide seal can be removed.

  17. REMOVE REAR DOOR REAR GUIDE SEAL

    Click here

  18. REMOVE REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  19. REMOVE REAR DOOR LOCK WITH MOTOR ASSEMBLY


    1. A005BR7E09
      Text in Illustration
      *a Release Plate

      Using a T30 "TORX" socket wrench, remove the 3 screws.

    2. Move the rear door lock with motor assembly downward to disconnect in from the release plate of the rear door outside handle frame sub-assembly and remove the rear door lock with motor assembly and cables as a unit.

    3. When reusing the rear door lock with motor assembly:


      1. A005D2Q

        Remove the door lock wiring harness seal from the rear door lock with motor assembly.

  20. REMOVE REAR DOOR LOCK COVER SUB-ASSEMBLY (w/o Double Locking System)

    Click here

  21. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY (w/o Double Locking System)

    Click here

  22. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY (w/ Double Locking System)

    Click here

  23. REMOVE REAR DOOR INSIDE LOCKING CABLE ASSEMBLY (w/o Double Locking System)

    Click here

  24. REMOVE REAR DOOR INSIDE LOCKING CABLE ASSEMBLY (w/ Double Locking System)

    Click here