HEADUP DISPLAY DISASSEMBLY

CAUTION / NOTICE / HINT

Note

When disassembling the headup display, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

PROCEDURE


  1. REMOVE COMBINATION METER MIRROR GLASS


    1. B005XZ4

      Remove the 4 screws and combination meter mirror glass.

  2. REMOVE METER CIRCUIT PLATE COVER


    1. B005Y1R

      Remove the 4 screws.

    2. B005ZLK

      Disengage the guide to remove the meter circuit plate cover as shown in the illustration.

  3. REMOVE NO. 1 COMBINATION METER MIRROR CASE


    1. B005YI2

      Remove the 2 screws.

    2. B005ZPI

      Disengage the 4 claws and remove the No. 1 combination meter mirror case.

  4. REMOVE COMBINATION METER MIRROR


    1. B005YZN

      Disconnect the connector.

    2. B005YI0

      Remove the 2 screws and combination meter mirror.

  5. REMOVE NO. 1 COMBINATION METER MIRROR PLATE


    1. B005XGJ

      Disengage the 2 claws and remove the No. 1 combination meter mirror plate as shown in the illustration.

  6. REMOVE NO. 2 COMBINATION METER MIRROR


    1. B005ZEE

      Remove the No. 2 combination meter mirror as shown in the illustration.

  7. REMOVE COMBINATION METER WIRE


    1. B005XPY

      Disengage the clamp and disconnect the connector to remove the combination meter wire.

  8. REMOVE METER CIRCUIT PLATE SUB-ASSEMBLY


    1. B005ZVL

      Remove the 2 screws.

    2. B005ZPU

      Pull the meter circuit plate sub-assembly in the direction indicated by the arrow to disengage the 2 guides and remove the meter circuit plate sub-assembly.