COMPRESSOR(for 1GR-FE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE FAN AND GENERATOR V BELT

    Click here

  3. REMOVE GENERATOR WITH CLUTCH PULLEY

    Click here

  4. REMOVE FRONT WHEEL LH

    Click here

  5. REMOVE FRONT FENDER APRON SEAL LH


    1. for 4WD, for Pre-Runner:

      Remove the 6 clips and front fender apron seal LH.

    2. for 2WD:

      Remove the 5 clips and front fender apron seal LH.

  6. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01LCKK

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with magnet clutch.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  7. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A01L8E9

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with magnet clutch.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  8. REMOVE COMPRESSOR ASSEMBLY WITH MAGNET CLUTCH


    1. A01LAW2

      Disconnect the connector.

    2. Detach the clamp.

    3. A01LC48

      Remove the 5 bolts and generator bracket and compressor assembly with magnet clutch.