POWER WINDOW REGULATOR MOTOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Use the same procedure for the RH side and LH side.

PROCEDURE


  1. INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY


    1. Using a T25 "TORX" socket wrench, install the power window regulator motor assembly with the 3 screws.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  2. INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY

    Click here

  3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  4. INSTALL FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY

    Click here

  5. INSTALL FRONT DOOR SERVICE HOLE COVER

    Click here

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  7. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  8. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  9. INSTALL DOOR ARMREST COVER

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  11. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  12. INSPECT POWER WINDOW OPERATION

    Click here