DIESEL THROTTLE BODY (w/o EGR Cooler) REMOVAL


  1. REMOVE INTERCOOLER ASSEMBLY

    Click here

  2. REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY (w/o Intercooler)


    1. w/ No. 1 Engine Cover


      1. A01DYA3E03
        Text in Illustration
        *1 No. 1 Engine Cover Sub-assembly
        *2 Claw
        *3 Pin

        Detach the 4 claws from the pins of the engine cover bracket and remove the No. 1 engine cover sub-assembly.

      2. Remove the 2 bolts and engine cover bracket.

    2. A01E0K7

      Disconnect the manifold absolute pressure sensor connector.

    3. Disconnect the vacuum hose from the gas filter.

    4. Loosen the 2 clamps.

    5. Remove the bolt and disconnect the No. 2 air cleaner pipe sub-assembly together with the 2 air hoses.

  3. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A01DZU2

      Disconnect the 2 connectors.

    2. A01E2KU

      Remove the 2 bolts, 2 nuts, diesel throttle body assembly and gasket.