HEADLIGHT CLEANER ACTUATOR REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during headlight washer actuator sub-assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function When Necessary Procedures are not Performed Link
Front bumper assembly (w/ Panoramic View Monitor System) Front television camera view adjustment Panoramic View Monitor System

Click here

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE HEADLIGHT WASHER COVER LH

    Click here

  3. REMOVE HEADLIGHT WASHER COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    1. B00851JC01
      B00888T Push
      B00847Z Disconnect in this Direction

      Disengage the claw and disconnect the headlight cleaner hose as shown in the illustration.

    2. B0085FLC01
      B00847Z Remove in this Direction

      Remove the headlight cleaner clamp as shown in the illustration.

    3. Slide the collar as shown in the illustration.

      B00844L

    4. Disengage the claw and guide as indicated by the arrows, in the order shown in the illustration to remove the headlight washer actuator sub-assembly LH.

      B0086CNC01
      B00888T Push B00847Z Remove in this Direction (1)
      B008776 Remove in this Direction (2) - -

  5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.