METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE METER / GAUGE SYSTEM

    1. Customizing with the GTS

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Utility / Customize / Warning or Display.

      5. Select the setting by referring to the table below.

        Warning

        Tester Display

        Description

        Default

        Setting

        ECU

        Key Remind Sound

        Function to change the key reminder buzzer sound frequency

        Normal

        00:Normal,01:Slow,10:Fast

        Combination meter assembly

        Driver Side Seatbelt Warning Buzzer

        Function to turn on/off the seat belt warning buzzer*1

        ON

        0:OFF,1:ON

        Combination meter assembly

        Front Passenger Side Seatbelt Warning Buzzer

        Function to turn on/off the seat belt warning buzzer*1

        ON

        0:OFF,1:ON

        Combination meter assembly

        Rear Seatbelt Warning Buzzer

        Function to turn on/off the seat belt warning buzzer*1*2

        ON

        0:OFF,1:ON

        Combination meter assembly

        Flasher Sound Volume Adjustment

        Function to change the flasher sound volume

        Medium

        10:Large,00:Medium,01:Small

        Combination meter assembly

        Lane Change Flashing Times Setting

        Function to change the lane change flashing times

        3

        000:OFF,001:3,010:4,011:5,100:6,101:7

        Combination meter assembly

        • *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.

        • *2: w/ Rear Seat Belt Warning

        Display

        Tester Display

        Description

        Default

        Setting

        ECU

        ECO Drive Indicator Zone

        Function to enable or disable the eco driving indicator zone display in the multi-information display

        ON

        0:OFF,1:ON

        Combination meter assembly

        ODO Display Time After IG OFF Setting

        Function to change the odometer display time

        30s

        00:30s,01:60s,10:600s,11:OFF

        Combination meter assembly

    2. Customizing with the combination meter assembly (for Segment Display Type)

      1. Turn the ignition switch to ON.

      2. Select the setting by referring to the table below.

        Setting Part

        Default

        Content

        Setting

        Relevant ECU

        Eco driving indicator light

        Eco On

        Function to turn on/off the eco driving indicator light

        Eco On or Eco OFF

        Combination meter assembly

    3. Customizing with the combination meter assembly (for TFT Display Type)

      1. Turn the ignition switch to ON.

      2. Enter the following menus: Settings.

      3. Select the setting by referring to the table below.

        Note:

        Be sure to record the current value before customizing.

        Table 1. Settings

        Combination Meter Assembly Display

        Description

        Default

        Setting

        ECU

        Clock

        Function to change the digital clock on the display

        24H*1, 12H*2

        12H or 24H

        Combination meter assembly

        Oil Maintenace

        Perform oil maintenance initialization.

        -

        ON or OFF

        Combination meter assembly

        Language

        Function to change the language on the display

        English

        English, French, Italian, Spanish, Germany, Russian, or Turkish

        Combination meter assembly

        Units

        Function to change the units on the display

        miles (MPG USA)

        km (km/L), km (L/100 km), miles (MPG USA), miles(MPG Imperial) or miles(MPG)

        Combination meter assembly

        ECO driving indicator light (Symbol)

        Function to activate/deactivate the ECO driving indicator light

        ON

        ON or OFF

        Combination meter assembly

        Drive Info

        Function to change the item to be displayed on Drive Info 1

        • Elapsed Time

        • Average Speed

        • Current Fuel Economy (Bar Type)

        • Average Fuel Economy (After Reset, After Start, After Refuel)

        • Average Speed (After Reset, After Start)

        • Elapsed Time (After Reset, After Start)

        • Distance (Range, After Start)

        • Other (Blank)

        Combination meter assembly

        Pop-up Display

        Function to change the interrupt display setting of each item

        -

        -

        -

        Color

        Function to change the cursor color when selecting a displayed item

        Clear Blue

        Clear Blue, Clear Turquoise, Deep Orange or Radiant Orange

        Combination meter assembly

        Interrupt Display

        Function to change the interrupt display setting of each item

        ON

        ON or OFF

        Combination meter assembly

        TPMS

        Press and hold the steering pad switch assembly to perform initialization.

        -

        -

        Combination meter assembly

        Initialization

        The setting items can be initialized

        -

        -

        Combination meter assembly

        *1: for Europe, Russia

        *2: except Europe, Russia