REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Slide Walk-in Seat Type LH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

A bolt without a torque specification is shown in the standard bolt chart (Click here).

PROCEDURE

  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    B242874C01

    *a

    Protruding Part

    1. Install the inner belt and connect the 3 point type belt anchor with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

      Note:

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  2. INSTALL SEAT CUSHION COVER WITH PAD

    Click here

  3. INSTALL REAR SEATBACK LOCK STRIKER COVER LH

    Click here

  4. INSTALL REAR SEAT CUSHION MOULDING LH

    Click here

  5. INSTALL CENTER SEAT HINGE COVER RH

    Click here

  6. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  7. INSTALL REAR SEAT UPPER RECLINING COVER LH

    Click here

  8. INSTALL REAR SEAT ASSEMBLY LH

    1. Install the rear seat assembly LH (Click here).