COMPRESSOR (for 1GR-FE) DISASSEMBLY


  1. REMOVE MAGNET CLUTCH ASSEMBLY

    A01E0WGE01

    1. Clamp the cooler compressor in a vise between aluminum plates.

    2. Connect the battery to the magnet clutch assembly as shown in the illustration to fix the hub and rotor in place.

    3. Wrap the drive belt around the rotor and securely hold it in place by hand.

    4. Remove the bolt, magnet clutch hub and magnet clutch washer(s).

      Tech Tips

      There is no set number of magnet clutch washers since they are used for adjusting.

      Text in Illustration
      *1 Battery
    5. A01DWWY

      Using a snap ring expander, remove the snap ring and magnet clutch rotor.

      Note

      Do not damage the seal cover of the bearing when removing the snap ring.

    6. A01DX4Y

      Using a snap ring expander, remove the snap ring and magnet clutch stator.