HORN INSPECTION

PROCEDURE


  1. INSPECT HIGH PITCHED HORN ASSEMBLY

    B005W16C27
    *a

    Component without harness connected

    (High Pitched Horn Assembly)

    1. Apply battery voltage and check operation of the high pitched horn according to the table below.

      OK
      Tester Connection Specified Condition

      A41-1 - Battery positive (+)

      Horn stay - Battery negative (-)

      		 High pitched horn sounds

      If the result is not as specified, replace the high pitched horn assembly.

  2. INSPECT LOW PITCHED HORN ASSEMBLY

    B005UH1C26
    *a

    Component without harness connected

    (Low Pitched Horn Assembly)

    1. Apply battery voltage and check operation of the low pitched horn according to the table below.

      OK
      Tester Connection Specified Condition

      A44-1 - Battery positive (+)

      Horn stay - Battery negative (-)

      		 Low pitched horn sounds

      If the result is not as specified, replace the low pitched horn assembly.