OIL LEVEL SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL LEVEL SENSOR

   1. 

      *1	Gasket
      *2	Engine Oil level Sensor
      *a	Engine Oil level Sensor Side
      *b	Float Side
      *c	Groove

      Install a new gasket to the engine oil level sensor.

      Note:

      Securely install the gasket to the engine oil level sensor groove.

   2. 

      Temporarily tighten the engine oil level sensor with the 5 bolts.

      Note:

      Do not deform the engine oil level sensor float or allow it to come in contact with other parts.

   3. Fully tighten the 4 bolts (A) first, and then tighten the bolt (B).

      11 N*m

      112 kgf*cm

      8 ft.*lbf

   4. Connect the engine oil level sensor connector.

2. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY

   Click here

3. ADD ENGINE OIL

   Click here

4. CHECK ENGINE OIL LEVEL

   Click here

5. INSPECT FOR OIL LEAK

   Click here

6. INSTALL REAR ENGINE UNDER COVER RH

7. INSTALL NO. 1 ENGINE UNDER COVER

8. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE

   Click here