ENGINE COOLANT TEMPERATURE SENSOR INSPECTION


  1. INSPECT WATER TEMPERATURE SENSOR


    1. B007SENE12

      Resistance inspection.


      1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.

        Standard resistance
        Temperature Resistance
        at 20°C (68°F) 2.32 to 2.59 kΩ
        at 80°C (176°F) 0.310 to 0.326 kΩ

        Note

        In case of checking the water temperature sensor in the water, be careful not to allow water to go into the terminals, and after checking, wipe out the sensor.